Insistez sur l’esprit artisan pour fabriquer des systèmes de brassage de haute qualité

E-mail

sales@micetbrewing.com

Téléphone

+86-531-82979225

WhatsApp

+86 18615260186

Installation and commissioning of craft beer equipment

Installation et mise en service d’équipements de bière artisanale

Next, our craft beer equipment manufacturer will take you to understand the installation and commissioning steps of craft beer equipment.
Table Of Contents

planning and preparation

  1. Check the device specifications and installation guide provided by the manufacturer.
  2. Determine the optimal location for each piece of equipment based on brewery layout and workflow considerations.
  3. Make sure the installation area has the necessary utilities such as water, electricity, gas and steam and is connected.
  4. Prepare the installation area by cleaning and decluttering the space, removing any obstructions or debris that may hinder the installation process.
Equipment assembly

Equipment assembly

Brewhouse equipment

  • Craft beer equipment in place: Refer to the relevant drawings, and determine the location of the equipment according to the process requirements and site conditions.
  • Brewhouse equipment: determine the operation plane, adjust the distance between the mashing pot and the lauter tank, connect the process pipeline fittings, wort pump, fill the saccharification with tap water, filter equipment and pipelines, supply steam for heating, start the wort pump to test for leaks, drain Check the components by steam, and start feeding after there is no abnormality.
  • Exhaust device: The mash pot is equipped with an exhaust cylinder, and the operation room is also equipped with a ventilation device to ensure that the indoor gas is discharged in time.
  • Mechanical part: check whether the tiller of the filter tank and other equipment, the motor of the mixer, the fixing bolts of the reducer, the connecting parts, etc. are loose or abnormal, and whether the oil level of the deceleration machine is normal. After wiring, turn on the power and adjust the direction of rotation , Trial run, feeding can only be done after correct.
  • Liquid level gauge: Check whether the glass tube is damaged, and it can leak only after it is correct.
Requirements: Steam heating type, the steam pressure is adjusted to 0.15 to 0.2MPA, and the water level in the mash pot must not be lower than the upper limit of the heating jacket.  

Fermentation equipment

After installing the L pipe, valve, pressure gauge, temperature sensor and other accessories in the fermenter, pressurize it with tap water to 0.18 to 0.2MPA, hold the pressure for 2 hours, clean it if there is no abnormality, and test it one by one.
Note: Refrigeration devices customized for craft beer equipment are installed and debugged by refrigeration engineers, and non-personal personnel are prohibited from opening them.

Auxiliary equipment installation

Install and connect any auxiliary equipment that supports the brewing process, such as chillers, boilers, filtration systems, pumps, compressors, and refrigeration units. Follow the manufacturer’s instructions for each piece of auxiliary equipment and ensure proper connections to utilities and control systems. Test the functionality and performance of assistive devices to verify that they are functioning as expected.

Disinfect and Clean

Clean and sanitize all brewing equipment to remove any contamination or residue before commissioning. Follow industry best practices and use approved cleaners to ensure a hygienic brewing environment.
restaurant brewing equipment for sale

Craft beer machine installation environment

Pay attention to issues such as environmental drainage and sanitation for the installation of beer equipment. If your craft beer machine is not installed on the first floor but on the second floor or other locations, you also need to consider the load-bearing capacity of the house where the equipment is installed and the laying of drainage and water supply settings.
The installation of craft beer equipment must consider the convenience of your use. Although craft beer machines are not used many times a day, if we don’t pay attention to the location of the equipment’s discharge, it may be inconvenient for us to use the equipment. Please don’t place the equipment to save space for the beer equipment.

Training and Documentation

Provide comprehensive training to brewery employees on the operation, maintenance, and safety procedures of brewery equipment and auxiliary systems. Document all installation and commissioning procedures, including equipment specifications, schematics, utility connections, and any modifications made during setup. Maintain equipment manuals or reference guides that include troubleshooting tips, maintenance schedules, and technical support contact information.
It is recommended to consult with the equipment manufacturer or supplier during installation and commissioning to ensure that you follow their specific guidelines and best practices. Additionally, the involvement of an experienced brewing professional or consultant can provide valuable insight and help in the successful installation and commissioning of brewing equipment.
Can regular dish soap be used to clean brewery equipment?
Équipement de brasserie

Best brewhouse equipment manufacturer from china Brewing good beer requires brewhouse equipment. Whether you are brewing beer for home, business or brewery, Micet Craft can

Read More »
10bbl conical fermenter
Cuve de fermentation

China stainless steel fermentation vessels manufacturer The fermentation tank is where the beer carry out the fermentation process, it provides a place suitable for life

Read More »
Can regular dish soap be used to clean brewery equipment?
Équipement de brasserie

Best brewhouse equipment manufacturer from china Brewing good beer requires brewhouse equipment. Whether you are brewing beer for home, business or brewery, Micet Craft can

Read More »
10bbl conical fermenter
Cuve de fermentation

China stainless steel fermentation vessels manufacturer The fermentation tank is where the beer carry out the fermentation process, it provides a place suitable for life

Read More »
Get a turnkey solution for brewery equipment
If you plan to open or expand the brewery, you can contact Micet Craft directly. Our engineers will design and manufacture brewery equipment according to your brewing process. Of course, we will also provide you with a complete turnkey solution. Also, if you plan to expand the brewery, we will provide you with customized solutions.

Laisser un commentaire

Votre adresse e-mail ne sera pas publiée. Les champs obligatoires sont indiqués avec *

Contact Micet Craft

We will contact you within 1 working day, please pay attention to the email with the suffix “@micetbrewing.com”. 

Contactez Micet Craft

Nous vous contacterons dans un délai d’un jour ouvrable. Veuillez prêter attention à l’email avec le suffixe “@micetbrewing.com”.

Wait! .......

Ready to start your brewery business?

We’re the experts in beer brewing equipment, offering tailored solutions for your needs. Whether you’re opening a new brewery or upgrading existing equipment, we’ve got you covered.

Here’s what you’ll get when you choose us:

  1. Custom Solutions

    :

    Our team of engineers will design equipment to fit your exact specifications, ensuring it’s a perfect match for your business.

  2. Special Offer

    :

    As a thank you for choosing us, we’re offering exclusive deals for new customers. Contact us now to learn more!

  3. Expert Advice

    :

    With over 16 years of industry experience, we’ll provide you with professional guidance to help you launch or expand your brewery business smoothly.

Note: Your email information will be kept strictly confidential.