Comment utiliser les sous-produits dans le processus de brassage de la bière ?

Among the processes involved in brewing beer, these processes generate a large number of by-products. The main brewing industry wastes include brewer’s spent grains, hot residue and carbon dioxide. Proper disposal of these wastes brings economic benefits and helps protect the environment from pollution caused by their excessive accumulation.

Although studies have shown that beer contains various functional compounds, the amount of these functional compounds in beer is diluted due to the high water content, while the large calorie value and alcohol content also limit the health effects of beer. In contrast, brewing by-products may contain more functional components during isolation. They can be used as a low-cost and nutritious source of feed and food additives. They also have the potential to be an inexpensive material for extracting compounds that are valuable to the food industry.

Sommaire masquer

1 Brewing beer and brewing by-products

2 Distillers grains

3 hops

4 surplus yeast

5 Application of brewery by-products in food industry

6 Turnkey Brewery

Brewing beer and brewing by-products

The brewing process of ordinary beer includes four main stages: malting, mashing, wort boiling, and fermentation. There are three main by-products produced during beer brewing (ie lees, hops, and residual yeast). These by-products have limited applications and are used in animal feed in the livestock industry.

Distillers grains

Distillers grains are the most abundant by-product of beer brewing, accounting for about 85% of the total beer by-product production. Distiller’s grains consist of barley husks, remaining endosperm starch granules, and other grain additives (such as wheat, rice, and corn) that give beer its distinctive flavor. Distiller grains are rich in protein, cellulose, and minerals, so they are often used to feed ruminants. Research has investigated adding distiller grains to bread and snacks to increase their fiber content.

hops

The main component of dry hops is fiber, followed by hop bitters and protein. Dried hops also contain ash, salt, polyphenols, tannins, and oils. The fiber in hops consists of xylose, mannose, galactose, and glucose. Of the added hops, only 15% remains in the final beer product. The other 85% is residue from spent hops. Although hops are rich in nitrogen, carbon, and protein, their bitter taste limits their application in food. The bitterness of spent hops can be fermented with Candida parapsilosis. After removal, the spent hops can be made into animal feed supplements. Because hops are rich in nitrogen, they can be used as soil conditioners and fertilizers.

surplus yeast

Residual yeast is the second most abundant by-product in beer brewing, accounting for approximately 10% of total by-products. The predominant element in yeast is carbon, accounting for 50% of the dry weight, followed by oxygen (30–35%), nitrogen (5%), helium (5%) and phosphorus (1%). The protein composition of leftover yeast, distillers grains and hops is similar, as they all contain many essential amino acids, vitamins and minerals, and are thus more used in animal feed and nutritional supplements. But, since yeast contains ribonucleic acid (RNA), which is produced by uric acid metabolism, excessive consumption of excess yeast can cause gout.

Application of brewery by-products in food industry

Brewery waste is used in various branches of the food industry, as feed additives and food ingredients. They can also be used as raw materials for the extraction of compounds used in the food industry or can be applied in biotechnological processes to get additives for the food industry.

Turnkey Brewery

If you’re planning to open a brewery, Micet craft can help you out. Micet provides a complete beer brewing system, including brewhouse equipment, fermentation equipment, beer filling system, etc. We provide very professional technical support and brewery-customized solutions, micet looks forward to cooperating with you!

Équipement de brassage de bière

Fabricant d’équipement de brasserie commerciale, conçu sur mesure pour votre site et vos recettes Micet Craft est un fabricant et fournisseur d’équipements de brasserie commerciale basé à Jinan, en Chine. Nous concevons et fabriquons des salles de brassage, des cuves de fermentation, des cuves de garde et des lignes de remplissage d’une capacité allant de

Réservoir de bière brillante

Fabricant professionnel de réservoirs à bière en Chine Le bright tank est un récipient destiné à stocker et à carboniser la bière, il est également appelé brite tank. Le réservoir lumineux est une partie importante du flux de travail des brasseurs de bière professionnels. Il peut être utilisé pour stocker et carbonater la bière, éliminant

Machine de remplissage de bière

Classification de la machine de remplissage de bière La machine de remplissage de bière est l’équipement de base de la chaîne de production de bière. Notre système de remplissage de bière utilise de l’acier inoxydable comme matériau de production. L’acier inoxydable n’est pas facile à porter et il est facile à nettoyer. Micet Craft vous

Équipement de brassage

Fabricant de matériel de brassage pour la bière, le vin, le kombucha et le cidre Micet Craft est un fabricant de matériel de brassage situé à Jinan, en Chine. Nous concevons et fabriquons des systèmes de brassage en acier inoxydable destinés à la bière, au vin, au kombucha et au cidre, allant des petits systèmes

Le savon à vaisselle ordinaire peut-il être utilisé pour nettoyer l'équipement de la brasserie ?

Équipement de brasserie

Fabricant d’équipements de salle de brassage : installations de brassage à 2, 3 et 4 cuves L’équipement de salle de brassage constitue la partie « à chaud » d’une brasserie : il s’agit des cuves dans lesquelles le malt moulu est mis en trempage, où le moût est séparé du grain, puis porté à ébullition

Cuve de fermentation

Cuves de fermentation La cuve de fermentation est l’endroit où la bière effectue le processus de fermentation. Elle fournit un lieu propice aux activités vitales et au métabolisme des micro-organismes. Pour s’adapter à l’utilisation de brasseries de différentes tailles, Micet Craft a produit une variété de tailles et de spécifications de cuves de fermentation. Les

Système de brassage de bière

Craft Brewery Systems : systèmes de brassage clés en main de 3,5 à 60 BBL Un système de brasserie est un ensemble complet d’équipements de brassage : la salle de brassage, les cuves de fermentation et de garde, ainsi que les systèmes de refroidissement, la tuyauterie et les dispositifs de commande qui les relient. Micet