Previous slide
Next slide
10BBL (barrel) beer brewing equipment refers to a beer production system with a capacity of 10 barrels (each barrel is approximately 31 gallons or 117 liters).10BBL beer brewing equipment is suitable for restaurants, commercial and industrial breweries. It is suitable for self-owned breweries that are much smaller than large corporate breweries. This type of brewery is usually characterized by a focus on flavor and brewing technology. The brewing system is equipped with a variety of heating methods, including electric heating, steam heating and gas heating. The brewery configuration can be 2, 3 or 2 vessels, or a combination brewery. In order to save your installation time, we also provide skid-type 10BBL breweries.
10BBL Brewery Equipment Advantages
- Brewhouse manways always use full glass manway.
- Mash tank is equipped with level gauge for easy observation
- 0.7mm wedge-wire false bottom, can be disassembled to clean, bottom is supported and fixed.
- Equipping with special inline hop filter to make the wort clearer before fermenting.
- The pump/motor uses ABB or JLEM brand with CE/UL approved, long life and low sound.
- Mash tun is equipped with grist hydrator to ensure uniform malt moistening.
- Brewhouse piping design with cold and hot water mixing device and flow meter, which can evenly mix the cold and hot water before mashing.
- The bottom of lauter tun is equipped with wort collection loop and an under-the-flush device.
- Equipping with wort balance tank to check the clarity of wort and protect the sieve plate.
- Equipping with sparge arm and double CIP cleaning loop on top of the tank.
- To avoid too much water vapor, the kettle design with indoor exhaust or outdoor exhaust depending on customer needs.
- Based on customer’s brewing process, we can customize brewhouse to meet the feeding both in boiling kettle and lauter tun.
- HLT design with return port, CIP and water inlet, which can realize the recovery and utilization of hot water between the heat exchanger.
- The working platform adopts water leakage and a non-slip design.
10BBL brewery equipment standard configuration
Malt Milling Unit
- Particle adjustable rolling crusher
- Flexible or steel auger to directly lift the milled grain to mash tun
Brewhouse Unit
- Mash/Lauter tun, Boiling/Whirlpool tun 2 vessel combination
- Hot water tank and cold water tank for optional in special combinations
- Infusion or decoction brewing methods are designed exactly
- Stainless steel is popular because of easy maintenance and clean, copper cladding for optional
- Two stages or a single-stage heat exchanger for wort cooling
- Completely stainless steel integrated work platform
- Sanitary and efficient wort pump
- All pipings and fittings
Fermentation Tank Unit
- Standard stainless steel conical cylindrical fermentation tanks
- Single size or double size as brewhouse is commonly used in microbreweries
- Tanks quantity is exactly calculated by fermentation cycle for various beers
- All manhole, valves, pressure gauges, fittings, etc are included
Bright Beer Tank Unit
- Standard stainless steel conical cylindrical fermentation tanks
- Single size or double size as brewhouse is commonly used in microbreweries
- Tanks quantity is exactly calculated by fermentation cycle for various beers
- All manhole, valves, pressure gauges, fittings, etc are included
Cooling Unit
- Insulated glycol water tank with or without copper coil for glycol liquid holding and mixing
- Efficiency chillers or refrigerators with freon to supply cooling energy
- Sanitary centrifugal pump for glycol water recycle among tanks and heat exchanger
- All pipes, fitting, insulation materials are included
Controlling Unit
- Electrical controlling cabinet with temperature, on-off controlling for brewhouse
- Electrical controlling cabinet with temperature, on-off controlling for cooling parts
- Temperature controller, thermocouple, solenoid valves, etc are included
- PLC with touch screen panel for special request
10BBL brewery equipment Basic Configuration
- Total volume: 13BBL, effective volume: 10BBL
- 20㎡ heat exchanger
- Hops online filter
- Aeration device
- Brewery PID controller
- Skid-mounted work platform
- 20BBL hot wine tank
- 20BBL cold wine tank
- 4*10BBL fermentation tank
- Controller
10BBL brewery equipment Details
Get a turnkey solution for brewery equipment
If you plan to open or expand the brewery, you can contact Micet Craft directly. Our engineers will design and manufacture brewery equipment according to your brewing process. Of course, we will also provide you with a complete turnkey solution. Also, if you plan to expand the brewery, we will provide you with customized solutions.