Insist on craftsman spirit to fabricate high-quality brewing systems

Email

sales@micetbrewing.com

Telephone

+86-531-82979225

WhatsApp

+86 18615260186
Previous
Next
1BBL Brewhouse is specially made for nano brewery and pilot brewery. It has a 45-50 gallon kettle and can brew 1BBL beer. 1BBL is an economic choice for novice brewers to switch from home brewing to commercial brewing. 1BBL Brewhouse is equipped with a hot liquor tank, a mash tun, a brew kettle, and two wort pumps. Of course, we also provide optional accessories for it. Examples include wort coolers and sanitary fittings.
Any nano-brewery owner eager to see business growth needs a reliable testing system. The 1BBL brewing system we sell is made of high-quality 304 stainless steel. It is easy to clean and can achieve 360° clean without dead ends. If you want to open a microbrewery or nano-brewery, Micet Craft can provide you with a turnkey solution. We very much hope to cooperate with you!

1BBL Brewhouse Advantages

  1. The Mash tank is equipped with a clamped level gauge for easy observation. All the lauter tun use milled sieve plates, which have higher filtration accuracy and better effect.
  2. The grains outdoor of lauter tun is equipped with a dustpan, which is convenient for grains out and cleaning. The drain outlet is separated from the discharge outlet, which is convenient for customers to discharge directly.
  3. According to the customer’s brewing process, the mash system can not only meet the feeding in the boiling kettle but also meet the feeding in the lauter t
  4. Ourmash system can realize both natural filtration and pumping The lauter tun stirring motor is equipped with a frequency converter, which can realize the step-less speed regulation. The rake motor can also be designed up and down to lift the rake.
  5. To avoid too much water vapor in the mashing area, the kettle is equipped with an indoor exhaust device or outdoor exhaust device depends on customer needs.
  6. Equipping with a special inline hop filter to make the wort clearer before fermenting.
  7. The pump motor uses ABB or JLEM American brand, long service life, and low sound.
  8. The mash tun is equipped with a grist hydrator to ensure uniform malt moistening.
  9. The brewhouse piping design is equipped with a cold and hot water mixing device, thermometer, and flow meter, which can evenly mix the cold and hot water before mashing.
  10. The bottom of lauter tun is equipped with a wort collection loop and under flush device
  11. Equipping with wort balance tank to check the clarity of wort and protect the sieve plate.
  12. Equipping with sparge arm and double CIP cleaning loop on top of the tank.
  13. Milling sieve plate, wedge-shaped gap 0.7mm, 4mm thickness, can be disassembled and cleaned, and the bottom is supported and fixed.
  14. The HLT was designed with a return port, CIP cleaning port, and water inlet, which can realize the recovery and utilization of hot water between the heat exchanger
  15. The working platform adopts water leakage and a non-slip design.
  16. Brewhouse manways always use full glass manway.

1BBL Brewhouse Standard Configuration

  • 2, 3, or 4 vessel systems available
  • All piping is TRC fitted, including every elbow, tee, and curve in the system; allows for a 100% sanitary system
  • Constructed of 304 or 316 stainless steel
  • All pumps in the brewhouse include 100% stainless steel pumps AND motors
  • Rake System have both non-lifting and hydraulic lifting optional
  • Floor mounted, vessel or ceiling mounted grist cases available
  • Flat bottom or conical bottom lauter tun

1BBL Brewhouse Optional Configuration

  • Automation systems
  • Complete Grain Mill System
  • Various Stainless Steel Finishes
  • Our standard beer brewing system comes with a 2B mill finish; other finishes are available including:
    Polished/Brushed/Mirror finish/Pickling passivation
    Copper Clad and/Copper accented

1BBL Brewhouse Specification

  • Effective volume: 1BBL
  • Total volume: 1.25BBL
  • Size: 740*1800mm
  • Material: SUS304/SUS316/red Copper
  • Heating method: Electric/steam/direct fire heating
  • Control system: PLC Simens or PID Schneider/ABB brand
  • Heating area: 0.2㎡
  • Power: 15-70 Kw depends on the size
  • Voltage: 3 phase/380(220, 415,480…)v/50(60)Hz
    Single Phase/220(110, 240…)v/50(60)Hz
  • Brewing batch: 6-12 brew/week
  • Work pressure: inner jacket 0.4MPa
    cooling jacket 0.5Mpa
  • Design pressure: inner jacket 0.2MPa
    cooling jacket 0.3Mpa
  • Brewmaster quantity: 1

         Note: 1 hl=100liter; 1 Gallon=3.7854 liter; 1 Barrel(BBL) =117Liter

1BBL Brewhouse Details

1BBL Brewhouse Details
1BBL Brewhouse Details-1
1BBL Brewhouse Details-2
1BBL Brewhouse Details-3
1BBL Brewhouse Details-4
1BBL Brewhouse Details-5
1BBL Brewhouse Details-6
1BBL Brewhouse Details-7
1BBL Brewhouse Details-8

Get 1BBL Brewhouse price

If you want to know more about the brewing system, you can contact us at any time. Micet Craft can provide you with customized product solutions. Of course, we will also provide you with the latest product prices. We look forward to working with you!
Scroll to Top

Contact Micet Craft