An Azerbaijani brewery wanted everything from malt milling to keg washing from one supplier, because a plant stitched together from four vendors is where commissioning stalls. MICET delivered 2000L brewery equipment as one turnkey package: mill, brewhouse, six fermenters, chiller, CIP, control cabinet and a keg washer, shipped in two containers.
What the 2000L Brewery Equipment Covers
The line starts at the mill and ends at a washed keg. Malted grain is cracked in a roller mill, mashed and lautered in a 2000L tank with raking gear, then boiled and whirlpooled in a second 2000L vessel. From there the wort is cooled in a two-stage plate exchanger on its way to six 2000L fermenters. A 2000L hot liquor tank feeds mash-in and sparge, and a gas steam boiler comes with the package, so the brewery never sources one separately.
Main Configuration
The 2000L brewery equipment is laid out as one line rather than four islands: mill to tun, tun to kettle, kettle to exchanger, exchanger to fermenter. The cabinet is already wired for twelve more fermenters, so a brewery that outgrows six tanks adds tanks, not a new control system.
Stage | Equipment | What it does for you |
Milling | Roller mill | Cracks malt with an adjustable gap, so crush follows the grist |
Brewhouse | Raking gear forwards to mash, reverses to push spent grain out; | |
Fermentation | Two jackets and two sensors per tank, glycol cooled | |
Hot water | 2000L hot liquor tank | Feeds mash-in and sparge from one temperature-controlled tank |
Heat exchange | Two-stage plate exchanger | Cools wort to pitching temperature in a single pass |
Steam | 200 kg/h gas boiler | Ships with the line instead of being sourced separately |
Cooling | 10HP glycol chiller | Runs every fermenter jacket, with a standby pump |
Cleaning | Three-tank CIP set | Caustic, sanitizer and hot water in one skid |
Control | Semi-automatic PLC | One-touch mash, boil and grain-out, remote monitoring |
Packaging | 30L and 50L DIN plus 20L Corny on the same machine |
The 2000L brewery equipment is laid out as one line rather than four islands: mill to tun, tun to kettle, kettle to exchanger, exchanger to fermenter. The cabinet is already wired for twelve more fermenters, so a brewery that outgrows six tanks adds tanks, not a new control system.
Shipping to Azerbaijan
The complete 2000L brewery equipment has been produced, inspected, and shipped to the customer in Azerbaijan. The system provides an integrated solution from malt milling to keg washing, supporting efficient and consistent beer production.
Where the Brewery Runs
Ale, lager and seasonal releases, packaged into 30L and 50L DIN kegs or 20L Corny kegs. The same washer takes all three formats with S-type spears, so draught accounts and small-format sales run off one machine instead of two.
Equipment Advantages
- Built to be cleaned daily. 304 stainless inside and out, full-penetration TIG welds and mirror-polished interiors, so a daily caustic cycle does not erode the tanks.
- Compact footprint. Mash tun, kettle/whirlpool and hot liquor tank stand in one line with the platform between them, so a 2000L brewery fits a normal hall.
- Flexible by design. Boil and whirlpool share one vessel, and one washer takes 30L and 50L DIN kegs together with 20L Corny, covering draught and small-format sales from one plant.
- Complete configuration. Mill, brewhouse, boiler, chiller, CIP, cabinet and keg washer arrive as one package, with no orphan equipment left for the customer to source.
- Fast batch turnaround. 2000L per batch on one-touch mash, boil and grain-out, with six fermenters running in parallel so the brewhouse keeps cycling.
- Room to grow. The cabinet is already reserved for twelve more fermenters, so expansion adds tanks rather than a new control system.
Client Feedback
The feedback after commissioning was about volume. Before the line the brewery sold locally and through a small number of bars; now it supplies draught accounts on a weekly cycle and keeps two or three styles running at once on the 2000L brewery equipment, instead of brewing one at a time. Kegs go back out instead of stacking up in the yard, and the owner’s summary was that the plant paid for itself sooner than the business plan assumed.
If you plan to open or expand the brewery, you can contact Micet Craft directly. Our engineers will design and manufacture brewery equipment according to your brewing process. Of course, we will also provide you with a complete turnkey solution. Also, if you plan to expand the brewery, we will provide you with customized solutions.
